Table of Contents
Advertisement
Adding TFTP Access to a Share (BUI)
For information on SRP targets and initiators, see
(SAN)" on page
TFTP Configuration
Trivial File Transfer Protocol (TFTP) is a simple protocol to transfer files. TFTP is designed to
be small and easy to implement, therefore, lacks most of the features of a regular FTP. TFTP
only reads and writes files (or mail) from/to a remote server. It cannot list directories, and
currently has no provisions for user authentication..
TABLE 68
Property
Default Root Directory
To use TFTP with a share, see
Adding TFTP Access to a Share (BUI)
Go to Configuration > Services.
1.
Check that the TFTP service is enabled and online. If not, enable the service.
2.
Go to Shares > Shares and select or add a share.
3.
Go to the Protocols tab, and check that TFTP access is enabled.
4.
5.
(Optional) Set the Share mode access to Read only or Read/Write.
Virus Scan Configuration
The Virus Scan service will scan for viruses at the filesystem level. When a file is accessed
from any protocol, the Virus Scan service will first scan the file, and both deny access and
quarantine the file if a virus is found. Once a file has been scanned with the latest virus
definitions, it is not rescanned until it is next modified. Files accessed by NFS clients that
280
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
128.
TFTP Properties
"Adding TFTP Access to a Share (BUI)" on page
"Configuring Storage Area Network
Description
The TFTP login location. The default is /export and
points to the top of the shares hierarchy. All users will be
logged into this location after successfully authenticating
with the TFTP service
280.
Advertisement
Table of Contents
