Canceling A Replication Update (Cli); Cloning A Replication Package (Bui) - Oracle ZFS Storage Appliance Administration Manual

"Manually Sending a Replication Update (BUI)" on page 481
■

Canceling a Replication Update (CLI)

You can cancel in-progess replication updates on the target. Replication packages are organized
in the CLI by source under shares replication sources.
1. From the target appliance, navigate to the replication package.
loader:> shares replication sources
loader:shares replication sources> show
Sources:
source-000 ayu
package-000 oldproj
package-001 aproj1
2. First select a source, then select a package.
loader:shares replication sources> select source-000
loader:shares replication source-000> select package-001
3.
Enter cancelupdate.
loader:shares replication source-000 package-001> cancelupdate
It might take several seconds for the cancellation to complete.
A manual update cannot be initiated from the target appliance. You must log into the
Note -
source appliance to initiate a manual update.
Related Topics
"Replication Packages" on page 550
■
"Manually Sending a Replication Update (CLI)" on page 481
■

Cloning a Replication Package (BUI)

A clone of a replication package is based on the most recently received replication snapshot.
PROJECT STATE
idle
receiving
LAST UPDATE
unknown
Sun Feb 21 2010 22:04:35 GMT+0000 (UTC)
Canceling a Replication Update (CLI)
Remote Replication 505