Table of Contents
Advertisement
Editing a Replication Target (CLI)
1.
Navigate to the targets node to set or unset the target hostname, root_password,
and label.
knife:> configuration services replication targets
2.
From this context, you can:
Add new targets.
■
View the actions configured with the existing target.
■
Edit the unique identifier (label) and/or hostname for the target.
■
Destroy a target, if no actions are using it.
■
A target should not be destroyed while actions are using it. Such actions will be
Note -
permanently broken. The system makes a best effort to enforce this but cannot guarantee
that no actions exist in exported storage pools that are using a given target.
If the share you are replicating is encrypted, be sure the target also supports
3.
data encryption.
Related Topics
"Replicating an Encrypted Share" on page 586
■
"Replication Targets" on page 529
■
Editing a Replication Action (BUI)
Navigate to the project or share, and click the Replication tab.
1.
2.
Select the project or share you want to edit.
3.
Click the edit icon
4.
From the Edit Replication Action screen, modify the properties, and click Apply.
For a description of replication actions, see
Related Topics
"Replication Actions and Packages" on page 530
■
.
"Replication Action Properties" on page
Editing a Replication Target (CLI)
547.
Remote Replication
501
Advertisement
Table of Contents
