Table of Contents
Advertisement
mkdir -p /zfssa/dbname/backup1
mkdir -p /zfssa/dbname/backup2
mkdir -p /zfssa/dbname/backup3
mkdir -p /zfssa/dbname/backup4
Updating the /etc/vfstab File
The UNIX new-line escape character (\) indicates a single line of code has been wrapped to
a second line in the listing below. When entering a wrapped line into fstab, remove the \
character and combine the two line segments, separated by a space, into a single line.
1.
To update the /etc/vfstab file, use one of the following options.
For a one-pool configuration:
192.168.36.200:/export/dbname/backup1 - /zfssa/dbname/backup1 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
192.168.36.200:/export/dbname/backup2 - /zfssa/dbname/backup2 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
192.168.36.200:/export/dbname/backup3 - /zfssa/dbname/backup3 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
192.168.36.200:/export/dbname/backup4 - /zfssa/dbname/backup4 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
2.
For a two-pool configuration:
192.168.36.200:/export/dbname/backup1 - /zfssa/dbname/backup1 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
192.168.36.201:/export/dbname/backup2 - /zfssa/dbname/backup2 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
192.168.36.200:/export/dbname/backup3 - /zfssa/dbname/backup3 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
192.168.36.201:/export/dbname/backup4 - /zfssa/dbname/backup4 \<br/>
nfs - yes rw,bg,hard,nointr,rsize=1048576,wsize=1048576,proto= \<br/>
tcp,vers=3,forcedirectio
Updating the /etc/vfstab File
Integration
641
Advertisement
Table of Contents
