Remote Replication Workflow; Checking Source And Target Appliance Compatibility - Oracle ZFS Storage Appliance Administration Manual

Remote Replication Workflow

Disabling a Replication Package - BUI,
■
For information about remote replication concepts, see:
"Remote Replication Concepts" on page 526
■
Remote Replication Workflow
The following steps show the general procedure for configuring and using remote
replication. For information about remote replication concepts, see
Concepts" on page
1. Check software compatibility on source and target appliances.
For information about software compatibility, see
Compatibility" on page
2. Set up network interfaces and routing.
For information about setting up network routing, see Setting Up Network Interfaces and Static
Routing - BUI, CLI.
3. Set up a replication target.
For information about creating a replication target, see Creating a Replication Target - BUI,
CLI.
4. Create a replication action.
For information about creating a replication action, see Creating a Replication Action - BUI,
CLI.
5. Send a replication update.
For information about sending a replication update, see Manually Sending a Replication Update
- BUI, CLI.
6. Optionally, create an offline replication.
For information about creating an offline replication action, see Creating an Offline Replication
- BUI, CLI.

Checking Source and Target Appliance Compatibility

Remote Replication is compatible between most Oracle ZFS Storage Appliance software
versions. Compatibility failures are caused if a replication update uses a feature that is not
470 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
526.
470.
CLI
"Remote Replication
"Checking Source and Target Appliance