Oracle ZFS Storage Appliance Administration Manual page 539

S1:shares Red action (uncommitted)> commit
6. Set up to replicate project Blue from pool sp1 to tp2.
Start with interface and address selection, and select interfaces S1/ixgbe3 and T2/ixgbe4,
knowing that both S and T are in the CLUSTERED state and that the interface addresses are
on the same subnet, 192.0.2.128/25. Next, define static routes on both appliances similar
to the above examples. Then create replication target object t2-2 on S1, and create the
replication action on S1 for project Blue using target object t2-2.
7. Set up to replicate project Green from pool sp2 to tp2.
Start with interface selection and select interfaces S2/ixgbe2 and T2/ixgbe2. Create static
routes on S2 and T2 using the selected interfaces and their addresses, define replication
target object t2-1 using address of T2/ixgbe2, and finally create the replication action for
project Green using target object t2-1.
8. Initiate replication for all three actions.
a. Start with project Red:
S1:> shares select Red replication select action-000
S1:shares Red action-000> sendupdate
b. Initiate replication for the actions for projects Blue and Green by following the previous
example.
Replication Data Path Illustrated Examples
The following figures illustrate the replication data paths during replication updates for the
replication actions for projects Red, Blue, and Green:
pool=tp1 (uncommitted)
Remote Replication Concepts
Remote Replication 539