Table of Contents
Advertisement
Switching Operations to the Recovery Site (BUI)
Next Step
"Switching Operations to the Recovery Site (BUI)" on page 518
■
Switching Operations to the Recovery Site (BUI)
After a failure occurs at the production site, perform a reverse replication at the recovery site,
and then redirect client operations to the recovery site.
1.
From the target appliance, go to Shares > Projects > Replica and look for the
replication package from the source appliance.
The replica is named source_appliance:project/share.
2.
Double-click the replication package, or click its edit icon
3.
Click the Replication tab.
4.
Click the reverse replication direction icon
5.
In the Reverse Replication window, enter a name for the new local project.
Each time replication is reversed, you provide a new project name and the package is converted
into a local, writable project.
6.
Click OK.
7.
Transfer client activity to the IP address of the appliance at the recovery site.
Depending on the protocol used, map (SMB clients) or remount (NFS clients) the shares using
the IP address or name of the appliance at the recovery site.
Next Step
"Updating the Production Site (BUI)" on page 518
■
Updating the Production Site (BUI)
After the production site is restored and back online, replicate the changes written to the
recovery site during the outage back to the production site.
518
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
.
Advertisement
Table of Contents
