Viewing Pool And Device Status (Bui) - Oracle ZFS Storage Appliance Administration Manual

Viewing Pool and Device Status (BUI)

1.
Go to configuration storage.
2. If you have multiple pools, a default pool is selected and displayed. If this is not
the pool you want to scrub, enter set pool= and specify another online pool.
If you have a single pool, the pool name is not displayed, but it is selected.
Note -
hostname:configuration storage (pool0)> set pool=pool1
3.
Enter scrub start.
hostname:configuration storage (pool1)> scrub start
4.
(Optional) Stop the scrub before it has completed by entering scrub stop.
hostname:configuration storage (pool1)> scrub stop
Entering scrub start again resumes the scrub from where it was stopped.
Related Topics
"Storage Pool Concepts" on page 109
■
Viewing Pool and Device Status (BUI)
You can check the status of pool and component devices. If there is a problem with a pool,
details about device status will also be listed.
1. Navigate to Configuration > Storage.
Click a pool to select it and see more details.
2.
Refer to the following table for a description of the pool status.
Pool Status
Online
Degraded
Faulted
108 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
pool = pool1
Description
A pool that has all devices operating normally.
A pool with one or more failed devices, but the data is still available due to a redundant
configuration.
One or more component devices are offline and there are insufficient replicas to continue
functioning.