Oracle ZFS Storage Appliance Administration Manual page 76

Adding a Static Route (CLI)
becomes passive and inaccessible by its BUI and CLI. To maintain access to a controller
regardless of its state, lock its management interface to make it private. The following
procedure locks the management interface on each clustered controller.
Caution -
to longer than necessary fault diagnosis and resolution times.
1.
On the first controller, go to configuration cluster resources and select the
management interface for the first controller, prefacing it with net/.
controller-a:> configuration cluster resources select net/igb0
Lock the interface by setting the type to private:
2.
configuration cluster resources (uncommitted)> set type=private
configuration cluster resources (uncommitted)> commit
3.
On the second controller, go to configuration cluster resources and select the
management interface for the second controller, prefacing it with net/.
controller-b:> configuration cluster resources select net/igb1
4. Lock the interface by setting the type to private:
configuration cluster resources (uncommitted)> set type=private
configuration cluster resources (uncommitted)> commit
Related Topics
To upgrade the software, see
■
Customer Service
Adding a Static Route (CLI)
1.
Go to configuration net routing.
2.
Enter create.
3.
Type show to list required properties, and set each.
4.
Enter commit.
76 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
Failure to configure locked management interfaces on clustered controllers may lead
"Upgrading the Software" in Oracle ZFS Storage Appliance
Manual.