Destroying A Snapshot (Bui) - Oracle ZFS Storage Appliance Administration Manual

hostname:shares myproject/demo_share snapshots> select demo_snap1
hostname:shares myproject/demo_share@demo_snap1> rollback
Type
5.
Y
hostname:shares myproject/demo_share@demo_snap1> rollback
Rolling back will revert data to snapshot, destroying newer data. Active initiators will
be disconnected.
Continue? (Y/N)
hostname: shares myproject/demo_share@demo_snap1> Y

Destroying a Snapshot (BUI)

Use the following procedure to destroy a snapshot.
To complete this procedure, you must have Super-User privileges or one of the following
Before You Begin ■
role authorizations within the projects and shares scope:
■
■
To add authorizations to a role, see
■
Go to the snapshot.
1.
For a snapshot of a filesystem or LUN, go to Shares > Shares and click
■
either Filesystems or LUNs, depending on whether the snapshot you want to
destroy is of a filesystem or LUN.
For a snapshot of a project, go to Shares > Projects.
■
2.
Hover over the appropriate share and click the edit icon
Click the Snapshots tab.
3.
4.
Hover over the snapshot you want to destroy and click the destroy icon
A confirmation dialog box appears.
If clones have been made of this snapshot, you are prompted with a list of the clones that will
be affected. Destroying a snapshot also destroys any clones of that snapshot and descendents of
those clones.
5. Click OK to confirm.
to confirm.
destroySnap - Allows destroying snapshots
destroy - Allows destroying projects and shares, including snapshot names
"Editing Authorizations for a Role (BUI)" on page
Destroying a Snapshot (BUI)
173.
.
.
Snapshots and Clones 459