Part Type
Description
Power Cable
Jumper, 1 m, straight
IEC60320-2-2 Sheet E(C14)plug,
right angle IEC60320-1-C13
connector, 10A. 250 VAC
Power Cable
Argentina, 2.5 m, IRAM207
Power Cable
XATO, PWRCRD, 2.5 meter, Brazil
C13
Power Cable
PWRCORD, CHINA, 2.5 meter,
GB2099, 10A
Power Cable
PWRCORD, ISRAEL, 2.5 meter,
SI-32, 10A
Power Cable
PWRCORD, INDIA, 2.5 meter,
IS1293, 10A
Power Cable
PWRCORD, KOREA, 2.5 meter,
KSC8305, 10A
Configuration and Ordering Examples
The components you need to order varies based on the library configuration.
Example 1: 30 cartridge library with an IBM LTO-7 FC drive, a second FC drive, and a
second power supply (redundant power):
•
7114334 — Base Module, 30 slots with IBM LTO-7 half-height FC tape drive
•
7114335 — Drive, IBM LTO-7, half-height FC
•
7101769 — Power supply
Example 2: 60 cartridge library with two partitions, a total of four IBM LTO-8 drives (2
SAS and 2 FC), and four power supplies:
•
7118432 — Base Module, 30 slots with one IBM LTO-8 half-height SAS tape drive
•
7101763 — Expansion Module, 30 slots
•
7118438 — Drive, IBM LTO-8, half-height SAS
•
7118437 — Drive, IBM LTO-8, half-height FC (x2)
•
7101769 — Power supply (x3)
Example 3: 90 cartridge library with one IBM LTO-8 FC drive
•
7118433 — Base Module, 30 slots with one IBM LTO-8 half-height FC tape drive
•
7101763 — Expansion Module, 30 slots (x2).
Note that an Expansion Module receives power from the Base Module. The
Expansion Module requires a power supply only when it contains a tape drive.
Example 4: Upgrade an existing library without partitions from 30 to 120 cartridges
with a SAS drive in each module (power is not redundant):
•
7101770 — Expansion Module, 30 slots (x3)
•
7118438 — Drive, IBM LTO-8, half-height SAS (x3)
•
7101771 — Power supply (x3)
Initial Order Part Number Upgrade Part Number
333U-10-10-C14
333A-25-10-AR
333A-25-10-BR
333A-25-10-CN
333A-25-10-IL
333A-25-10-IN
333A-25-10-KR
Chapter 1
SL150 Marketing Part Numbers
PWRCORD10187055-Z
N/A
N/A
N/A
N/A
N/A
N/A
1-15