Table of Contents
Advertisement
Use the following procedure to make a clone of an existing clone.
Once you have created a clone from a snapshot of a filesystem or LUN, you can work with that
clone as with any other share. You can take a snapshot of the clone, and you can make a clone
of that snapshot. You can continue this process to make clones of clones indefinitely.
1.
Take a snapshot of the clone using one of these procedures:
"Taking a Snapshot (BUI)" on page 440
■
"Taking a Snapshot (CLI)" on page 441
■
Clone the snapshot using one of these procedures:
2.
"Cloning a Snapshot (BUI)" on page 461
■
"Cloning a Snapshot (CLI)" on page 463
■
Viewing Clones of a Snapshot (BUI)
Use the following procedure to view a list of all clones created from a particular snapshot.
These are also called the "dependent clones" of the snapshot.
1.
Go to Shares > Shares and click either Filesystems or LUNs, depending on
whether you want to view clones of a filesystem or a LUN.
2.
Hover over the appropriate share and click the Edit icon
3.
Click the Snapshots tab.
4.
Hover over the appropriate snapshot and click "Show..." under Clones.
A window appears with a list of the snapshot's dependent clones and the projects in which they
are located.
If the "Show..." link does not appear, the snapshot has no clones.
5.
Click OK to close the window.
Viewing Clones of a Snapshot (CLI)
Use the following procedure to view a list of all clones created from a particular snapshot.
Go to and select the snapshot.
1.
Viewing Clones of a Snapshot (BUI)
.
Snapshots and Clones
465
Advertisement
Table of Contents
