Rolling Back To A Snapshot (Cli) - Oracle ZFS Storage Appliance Administration Manual

Rolling Back to a Snapshot (CLI)

1. Go to the share or project that contains the snapshot you want to rename.
To restore a filesystem snapshot, go to Shares > Shares.
■
To restore a LUN snapshot, go to Shares > Shares and click LUNs.
■
2. Hover over the share that contains the snapshot you want to restore and click
the edit icon
3. Click the Snapshots tab.
4.
Hover over the snapshot you want to restore, click its rollback icon
confirm your action.
Rolling Back to a Snapshot (CLI)
Use the following procedure to roll back, or restore, a filesystem or LUN to an existing
snapshot.
Restoring a snapshot requires destroying any newer snapshots and their clones, and it reverts
the share contents to what they were at the time the snapshot was taken. Property settings on the
share are not affected, but changes to filesystem root directory access are lost during rollback.
Caution -
1. Go to and select the share that contains the snapshot you want to restore.
hostname:> shares select myproject
hostname:shares myproject> select demo_share
2. Enter
hostname:shares myproject/demo_share> snapshots
3.
Enter list to view the list of snapshots for the project or share.
hostname:shares myproject/demo_share snapshots> list
demo_snap1
demo_snap2
4.
Select the snapshot you want to restore, then enter the rollback command.
458 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
.
This procedure cannot be undone.
.
snapshots
, and