Table of Contents
Advertisement
For the Certificate source, select Server to search the current server and retrieve the certificate
(in an insecure manner), and use it to validate the certificate presented later.
5.
Go to Configuration > Users, and add users as needed using LDAP usernames.
For information about adding users, see
Related Topics
"Setting Properties with Multiple Attribute Value Pairs (CLI)" on page 287
■
"LDAP Properties" on page 290
■
"LDAP Custom Mappings" on page 291
■
Setting Properties with Multiple Attribute Value Pairs (CLI)
To set LDAP property values that have multiple attribute value pairs with equal signs (=),
surround each attribute value pair with double quotation marks.
1.
Go to configuration services ldap.
2.
To set multiple attribute value pairs, use the following commands:
hostname:configuration services ldap> set user_mapattr="uid=uid",
"uidnumber=uidNumber","gidnumber=gidNumber",
"gecos=displayName","description=distinguishedName",
"homedirectory=unixHomeDirectory"
Related Topics
"Adding an Appliance Administrator (BUI)" on page 286
■
"LDAP Properties" on page 290
■
"LDAP Custom Mappings" on page 291
■
Configuring LDAP Security Settings (BUI)
To configure security settings for the LDAP service, use the following procedure.
1.
Go to Configuration > Services.
2.
Under Directory Services, select LDAP.
For Security Settings, select one of the following authentication options:
3.
Setting Properties with Multiple Attribute Value Pairs (CLI)
"Configuring Users" on page
160.
Appliance Services
287
Advertisement
Table of Contents
