Oracle ZFS Storage Appliance Administration Manual page 200

Shutting Down a Clustered Configuration (CLI)
controller-a
Note -
problem. Contact Oracle Support before proceeding.
3.
Shut down the controller-b, using the following commands:
controller-b:configuration cluster> cd /
controller-b:> maintenance system poweroff
This will turn off power to the appliance. Are you sure? (Y/N)Y
Note -
controller begins automatically.
4.
From controller-a, use the show command to verify that controller-b has been
powered off and is in state OWNER/unknown.
controller-a:configuration cluster> show
state = AKCS_OWNER
description = Active (takeover completed)
peer_asn = 365ed33c-3b9d-c533-9349-8014e9da0408
peer_hostname = controller-b
peer_state = OWNER/unknown
peer_description =
5.
Shut down controller-a using the following commands:
controller-a:configuration cluster> cd /
controller-a:> maintenance system poweroff
This will turn off power to the appliance. Are you sure? (Y/N) Y
6. (Optional) To confirm that both controllers are powered off, log into the Oracle
ILOM and enter:
->show /SYS power_state
For information about accessing ILOM, see
Command Line Interface" in Oracle ZFS Storage Appliance Customer Service
7. Power off the disk shelves.
Place the power supply on/off switches to the "O" off position.
a.
200 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
If the status of each controller does not agree, the cluster may be experiencing a
If both controllers have a status of AKCS_CLUSTERED, a takeover of the surviving
controller-b
"Logging in to Oracle ILOM Remotely Using a
Condition
or clustering has not yet been
configured.
Manual.