Oracle ZFS Storage Appliance Administration Manual page 329

Hide thumbs Also See for ZFS Storage Appliance:
Table of Contents

Advertisement

Field Name
SEVERITY
EVENT-TIME
PLATFORM
CSN
HOSTNAME
SOURCE
REV
EVENT-ID
DESC
AUTO-RESPONSE
REC-ACTION
The SEVERITY field will be set to one of the following values:
SYSLOG Severity Fields
TABLE 97
Severity
Minor
Description
or ignore additional fields if a decimal integer greater
than one is specified.
The severity of the condition associated with the problem
that triggered the alert. The list of severities is shown
below.
The time corresponding to this event. The time will be in
the form "Day Mon DD HH:MM:SS YYYY" in UTC.
For example: Fri Aug 14 21:34:22 2009.
The platform identifier for the appliance. This field is for
Oracle Service use only.
The chassis serial number of the appliance.
The canonical name of the appliance as defined by the
System Identity configuration. See
The subsystem within the appliance software that emitted
the event. This field is for Oracle Service use only.
The internal revision of the subsystem. This field is for
Oracle Service use only.
The Universally Unique Identifier (UUID) associated
with this event. Oracle's Fault Management system
associates a UUID with each alert and fault diagnosis
such that administrators can gather and correlated
multiple messages associated with a single condition,
and detect duplicate messages. Oracle Service personnel
can use the EVENT-ID to retrieve additional postmortem
information associated with the problem that may help
Oracle respond to the issue.
Description of the condition associated with the event.
The automated response to the problem, if any, by the
Fault Management software included in the system.
Automated responses include capabilities such as
proactively offlining faulty disks, DRAM memory chips,
and processor cores.
The recommended service action. This will include
a brief summary of the recommended action, but
administrators should consult the knowledge article and
this documentation for information on the complete
repair procedure.
Syslog Level
LOG_WARNING
Configuring SNMP to Send Traps (BUI)
System
Identity.
Description
A condition occurred that does not
currently impair service, but the
Appliance Services
329

Advertisement

Table of Contents
loading

Table of Contents