Table of Contents
Advertisement
Connect Disk Shelves
The following illustration shows the Oracle ZFS Storage ZS7-2 mid-range model with external SAS-3 HBAs in slots
2 and 10, and connected to the Oracle Storage Drive Enclosure DE3-24P disk shelf. For additional configuration
options, see the Oracle ZFS Storage Appliance Cabling Guide available from
https://docs.oracle.com/en/
storage. Do not connect power cables to the disk shelves or controllers until instructed to do so in "Power On and
Configure the System."
Power On and Configure the System
Required information: A) Network host name and port of your serial connection, or B) Network management port
DHCP-assigned address. Connect disk shelf power cables, power on disk shelves, connect controller power cables,
power on controllers, and configure the system as described in the Oracle ZFS Storage Appliance Installation Guide
available from https://docs.oracle.com/en/storage.
Perform Initial Configuration
For detailed information, see the Oracle ZFS Storage Appliance Installation Guide available from
https://docs.
oracle.com/en/storage, including properly configuring the management interfaces and updating the controller
software.
5
Advertisement
Table of Contents
Need help?
Do you have a question about the ZFS Storage ZS7-2 and is the answer not in the manual?
Questions and answers