Changing Fc Port Modes (Cli); Discovering Fc Ports (Cli) - Oracle ZFS Storage Appliance Administration Manual

Changing FC Port Modes (CLI)

To change FC port modes, use the following CLI commands:
dory:configuration san fc targets> set targets="wwn.2101001B32A11639"
targets = wwn.2101001B32A11639 (uncommitted)
dory:configuration san fc targets> commit
Related Topics
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
■

Discovering FC Ports (CLI)

To discover FC Ports, use the following CLI commands:
dory:configuration san fc targets> show
Properties:
targets = wwn.2100001B32811639,wwn.2101001B32A12239
Targets:
NAME MODE WWN
target-000 target wwn.2100001B32811639
target-001 initiator wwn.2101001B32A11639
target-002 initiator wwn.2100001B32812239
target-003 target wwn.2101001B32A12239
dory:configuration san fc targets> select target-000
dory:configuration san fc targets target-000> show
Properties:
discovered_ports = 6
link_failure_count = 0
loss_of_sync_count = 0
loss_of_signal_count = 0
protocol_error_count = 0
PORT
PCIe 5: Port 1
PCIe 5: Port 2
PCIe 2: Port 1
PCIe 2: Port 2
wwn = wwn.2100001B32811639
port = PCIe 5: Port 1
mode = target
speed = 4 Gbit/s
Changing FC Port Modes (CLI)
SPEED
4 Gbit/s
0 Gbit/s
0 Gbit/s
0 Gbit/s
Configuring the Appliance 135