Table of Contents
Advertisement
Setting the Appliance Certificate (CLI)
Setting the Appliance Certificate (CLI)
To set the appliance certificate, use the following steps.
1.
To view all certificate entries, go to configuration services identity certificates,
and enter the command show.
hostname:configuration services identity certificates> show
Properties:
Certificates:
CERT
cert-000 req hostname.us.example.com Joe Test CA
cert-001 CA
cert-002 cert hostname.us.example.com Joe Test CA
2.
To set a certificate as the default, use the following commands.
hostname:configuration services identity certificates> set default=cert-000
hostname:configuration services identity certificates> commit
Destroying a CSR or Certificate (BUI)
To destroy a CSR or certificate, use the following steps.
Note -
certificate derived from that CSR will not be possible. Destroying a certificate also destroys the
associated private key. Therefore, re-importing that certificate will not be possible.
1.
Go to Configuration > Services > System Identity.
Click the Certificates tab.
2.
3.
Hover over an existing entry and click the trash icon
4.
Click DESTROY.
Destroying a CSR or Certificate (CLI)
To destroy a CSR or certificate, use the following steps.
338
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
default = auto
TYPE FOR
Joe Test CA
default= cert-000 (uncommitted)
Destroying a CSR also destroys the associated private key. Therefore, importing a
ISSUER
Joe Test CA
.
EXPIRES
2015-12-4
2015-1-2
2015-12-3
Advertisement
Table of Contents
