Threshold Alerts - Oracle ZFS Storage Appliance Administration Manual

Executing a Workflow
Workflows can be optionally executed as alert actions. To let workflow be eligible as an alert
action, its alert action must be set to true. For more information about executing a workflow,
see "Maintenance Workflows" on page

Threshold Alerts

These are alerts based on the statistics from Analytics. The following are properties when
creating threshold alerts:
TABLE 41 Threshold Alert Properties
Property
Threshold
exceeds/falls below
Timing: for at least
only between/only during
Repost alert every ... this condition persists.
Also post alert when this condition clears for at least ...
The "Add Threshold Alert" dialog has been organized so that it can be read as though it is a
paragraph describing the alert. The default reads:
Threshold CPU: percent utilization exceeds 95 percent.
Timing for at least 5 minutes only between 0:00 and 0:00 only during weekdays.
Repost alert every 5 minutes while this condition persists.
Also post alert when this condition clears for at least 5 minutes.
Related Topics
"Configuring a Threshold Alert (BUI)" in Oracle ZFS Storage Appliance Analytics Guide,
■
Release OS8.6.x
587.
Description
The threshold statistic is from Analytics, and is self
descriptive (eg, "Protocol: NFSv4 operations per
second")
defines how the threshold value is compared to the
current statistic
Duration which the current statistic value must exceed/
fall below the threshold
These properties may be set so that the threshold is only
sent during certain times of day - such as business hours
If enabled, this will re-execute the alert action (such as
sending email) every set interval while the threshold
breech exists
Send a followup alert if the threshold breech clears for at
least the set interval
Adding an Alert Action (CLI)
Configuring the Appliance 191