Table of Contents
Advertisement
Configuring SMB Data Service (BUI)
8.
Click the Protocols tab for the project and set the SMB resource name to on.
Enable sharesmb and share-level ACL for the Project.
9.
10.
Click APPLY to activate the configuration.
Configuring SMB Data Service (BUI)
1.
Go to Configuration > Services > SMB and click the power icon
service.
2.
Set SMB properties and click APPLY to activate the configuration. See
Service Properties" on page
Click the Autohome tab on the Configuration > Services > SMB screen to set
3.
autohome rules to map SMB clients to home directories as described in
Autohome" on page
4.
Click the Local Groups tab on the Configuration > Services > SMB screen and
use the add item icon
groups as described in
Click APPLY to activate the configuration.
FTP Configuration
The FTP (File Transfer Protocol) service allows filesystem access from FTP clients.
Anonymous logins are not allowed, users must authenticate with whichever name service is
configured in Services.
To configure FTP, use the following sections:
"Adding FTP Access to a Share (BUI)" on page 262
■
"FTP Properties" on page 263
■
"FTP Logs" on page 264
■
Adding FTP Access to a Share (BUI)
Go to Configuration > Services.
1.
262
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
244.
250. Click APPLY to activate the configuration.
to add administrators or backup operator users to local
"Adding a User to an SMB Local Group" on page
to enable the
"SMB
"SMB
252. a
Advertisement
Table of Contents
