Table of Contents
Advertisement
Configuring Storage Area Network (SAN)
TABLE 27
Field
ID
Active
Remote Client
Authenticated
Data State
Mover State
Current Operation
Progress
NDMP States
The NDMP Data State shows the state of the backup or restore operation. Possible values are:
Active - The data is being backed up or restored.
■
Idle - Backup or restore has not yet started or has already finished.
■
Connected - Connection is established, but backup or restore has not yet begun.
■
Halted - Backup or restore has finished successfully or has failed or aborted.
■
Listen - Operation is waiting to receive a remote connection.
■
The NDMP Mover State shows shows the state of the NDMP device subsystem. Examples for
tape devices are:
Active - Data is being read from or written to the tape.
■
Idle - Tape operation has not yet started or has already finished.
■
Paused - Tape has reached the end or is waiting to be changed.
■
Halted - Read/write operation has finished successfully or has failed or aborted.
■
Listen - Operation is waiting to receive a remote connection.
■
Configuring Storage Area Network (SAN)
The SAN configuration page lets you connect your appliance to your Storage Area Network
(SAN). A SAN is made up of three basic components:
A client that will access the storage on the network
■
128
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
NDMP Status - Recent Activity
Description
NDMP backup ID
Backup currently active
NDMP client address and port
Shows if the client has completed
authentication yet
See Data State
See Mover State
Current NDMP operation
A progress bar for this backup
Examples
49
No
192.168.1.219:4760
Yes, No
Active, Idle, ...
Active, Idle, ...
Backup, Restore, None
Advertisement
Table of Contents
