Creating A Replication Target (Cli) - Oracle ZFS Storage Appliance Administration Manual

Name - a name of the target to display in the BUI and CLI of the source appliance.
■
Hostname - an IP address, or host name, of the target appliance.
■
Use an IP address configured with a static route to force traffic over a specific
Note -
network interface.
Root password - the root password of the target appliance, to authorize the connection.
■
4. Click Add.
Related Topics
"Replication Targets" on page 529
■
"Remote Replication Workflow" on page 470
■
"Replicating an Encrypted Share" on page 586
■

Creating a Replication Target (CLI)

A replication target establishes a secure communication connection between source and target
appliances. To create a replication target:
1.
From the source appliance, navigate to the targets node, and enter target to
configure a remote appliance as a replication target.
host_source:> configuration services replication targets> target
host_source:configuration services replication target (uncommitted)>
2.
Set the target hostname, root_password, and label.
Use an IP address configured with a static route to force traffic over a specific network
Note -
interface.
host_source:configuration services replication target (uncommitted)> set hostname=203.
123.225.201
host_source:configuration services replication target (uncommitted)> set
root_password=password
host_source:configuration services replication target (uncommitted)> set label=repl_1
Commit the changes.
3.
host_source:configuration services replication target (uncommitted)> commit
Creating a Replication Target (CLI)
Remote Replication 475