Configuring The Appliance; Initial Appliance Configuration; Network Configuration - Oracle ZFS Storage Appliance Administration Manual

Configuring the Appliance

To configure the appliance, use the following sections:
"Initial Appliance Configuration" on page 55
■
"Network Configuration" on page 55
■
"Configuring Storage" on page 88
■
"Understanding the Appliance Status" on page 113
■
"Configuring Storage Area Network (SAN)" on page 128
■
"Configuring Users" on page 160
■
"Setting Appliance Preferences" on page 181
■
"Configuring Alerts" on page 186
■
"Appliance Cluster Configuration" on page 193
■

Initial Appliance Configuration

Initial configuration can be repeated at a later time by clicking the INITIAL SETUP button on
the Maintenance > System screen, or by entering the maintenance system setup context in the
CLI.
Detailed initial configuration information is located in
Time" in Oracle ZFS Storage Appliance Installation

Network Configuration

The Networking Configuration features lets you create a variety of advanced networking
setups using your physical network ports, including link-aggregations, virtual NICs (VNICs),
virtual LANs (VLANs), and multipathing groups. You can then define any number of IPv4 and
IPv6 addresses for these abstractions, for use in connecting to the various data services on the
system.
There are four components to a system's network configuration:
"Configuring the Appliance for the First
Guide.
Configuring the Appliance 55