Table of Contents
Advertisement
Extending an LACP Aggregation (BUI)
1.
Mouse-over a device in the Devices list.
2.
Click the
icon, and drag the device onto an aggregation datalink, and release.
3.
Click "APPLY" at the top of the page to commit this configuration.
Extending an IPMP group (BUI)
1.
Mouse-over an interface in the Interfaces list.
2.
Click the
icon, and drag the device onto an IPMP interface, and release.
3.
Click "APPLY" at the top of the page to commit this configuration.
Creating an InfiniBand Partition Datalink and Interface (BUI)
1.
Click the Datalink
2.
Optionally, set name.
3.
Click the IB Partition checkbox.
Choose a device from the Partition Devices list.
4.
5.
Enter a four-digit hexadecimal number for the partition key, which must match
what was configured on the InfiniBand subnet manager.
6.
Choose link mode from the drop down menu.
Click "APPLY". The new partition datalink will appear in the Datalinks list.
7.
8.
Click the Interface
Set desired properties, and choose the datalink previously created.
9.
icon.
icon.
Extending an LACP Aggregation (BUI)
Configuring the Appliance
65
Advertisement
Table of Contents
