Table of Contents
Advertisement
Changing Account Information (BUI)
Property
Smarthost hostname
Allow customized from address
Custom from address
When changing properties, you can use Alerts to send a test email to verify that the properties
are correct. A common reason for undelivered email is misconfigured DNS, which prevents
the appliance from determining which mail server to deliver the mail to; as described earlier, a
smarthost could be used if DNS cannot be configured.
TABLE 90
Log
network-smtp:sendmail
mail
SNMP Configuration
The Simple Network Management Protocol (SNMP) service provides two different functions
on the appliance:
Appliance status information can be served by SNMP.
■
Alerts can be configured to send SNMP traps. See
■
SNMP versions v1, v2c, and v3 are available when this service is enabled. The appliance
supports a maximum of 128 physical and logical network interfaces. More than 128 network
interfaces could cause time outs for such commands as snmpwalk and snmpget. If you need
more than 128 network interfaces, contact Oracle Support.
To configure SNMP, see the following sections:
"Configuring SNMP to Serve Appliance Status (BUI)" on page 323
■
"Configuring SNMP to Send Traps (BUI)" on page 323
■
"SNMP Properties" on page 323
■
"SNMP MIBs" on page 324
■
"Sun FM MIB" on page 325
■
"Sun AK MIB" on page 325
■
322
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
SMTP Logs
Description
Outgoing mail server hostname.
If enabled, the From address for email is set to the
Custom from address property. It may be desirable
to customize this if the default From address is being
identified as spam, for example.
The From address to use for outbound email.
Description
Logs the SMTP service events
Log of SMTP activity (including mails sent)
"Configuring Alerts" on page
186.
Advertisement
Table of Contents
