San Terminology - Oracle ZFS Storage Appliance Administration Manual

Configuring SRP Targets (CLI)
On clustered platforms, peer targets should be configured into the same target group for highly
available (multi-pathed) configurations. SRP multipathed I/O is an initiator-side configuration
option.
SRP initiators have the following configurable properties.
TABLE 33
Property
Initiator EUI
Alias
SRP performance can be observed via Analytics, whereby one can breakdown operations or
throughput by initiator or target.
Related Topics
Configuring FC Port Modes (BUI)
■
Discovering FC Ports (BUI)
■
Creating FC Initiator Groups (BUI)
■
Associating a LUN with an FC Initiator Group (BUI)
■
Changing FC Port Modes (CLI)
■
Discovering FC Ports (CLI)
■
Creating FC Initiator Groups (CLI)
■
Associating a LUN with an FC Initiator Group (CLI)
■
Scripting Aliases for Initiators and Initiator Groups (CLI)
■
Configuring SAN iSCSI Initiators
■
Creating an Analytics Worksheet (BUI)
■
Adding an iSCSI Target with an Auto-generated IQN (CLI)
■
Adding an iSCSI Target with a Specific IQN and RADIUS Authentication (CLI)
■
Adding an iSCSI Initiator with CHAP Authentication (CLI)
■
Adding an iSCSI Target Group (CLI)
■
Adding an iSCSI Initiator Group (CLI)
■
Configuring SRP Target (BUI)
■
Configuring SRP Targets (CLI)
■

SAN Terminology

To configure the appliance to operate on a SAN, you should understand some basic SAN terms:
158 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
SRP Initiator Properties
Description
The EUI for this initiator.
A human-readable nickname for this initiator.