Adding A Disk Shelf To An Existing Storage Pool (Bui) - Oracle ZFS Storage Appliance Administration Manual

Adding a Disk Shelf to an Existing Storage Pool (BUI)

hostname:configuration storage (pool0) discover>
3.
Enter done.
4.
Enter show.
hostname:configuration storage (pool0)> show
Pools:
POOL
-> pool0
pool1
Properties:
5.
Enter set pool= and the name of the pool you want to import.
Note -
hostname:configuration storage select> set pool=pool1
A message reminds you to verify that storage is correctly attached and functioning.
6.
Enter done.
Related Topics
"Unconfiguring a Storage Pool (CLI)" on page 104
■
"Renaming a Storage Pool (CLI)" on page 105
■
Adding a Disk Shelf to an Existing Storage Pool
(BUI)
Use the following task to add a disk shelf to an existing storage pool.
94 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
OWNER
hostname
hostname
pool = pool0
status = online
errors = 0
owner = hostname
profile = mirror
log_profile = log_stripe
cache_profile = cache_stripe
scrub = none requested
If you have a single pool, the pool name is not displayed, but it is selected.
pool = pool1
DATA PROFILE LOG PROFILE STATUS
mirror log_stripe
- -
ERRORS
online 0
exported -