Setting User Or Group Quotas (Cli); Oracle Zfs Storage Appliance Administration Guide, Release Os8.6.X • September - Oracle ZFS Storage Appliance Administration Manual

Setting User or Group Quotas (CLI)

The user and group quota properties are validated separately from the other properties.
However, you may only see one validation error if an invalid user/group as well as another
invalid property is entered. Correcting one error and applying the changes will show any
remaining error messages.
If you see an error message that an invalid property has been entered, it may be an invalid
user/group, another invalid property on the page, or both. Fixing one invalid property and then
applying the changes will reveal any remaining error messages.
Related Topics
"Setting User or Group Quotas" on page 398
■
Setting User or Group Quotas (CLI)
Quotas can be set for a user or group at the project or filesystem level.
1.
Go to shares, select a project, then select a share, as shown in this example:
hostname:> shares select default select eschrock
2.
Enter users, then list to see the current users.
hostname:shares default/eschrock> users
hostname:shares default/eschrock users> list
USER
user-000
user-001
user-002
Note -
set, does not appear in the list of active users.
3.
Enter select and the name= of the user.
hostname:shares default/eschrock users> select name=eschrock
hostname:shares default/eschrock user-002> get
360 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
NAME
root
ahl
eschrock
Any user that is not consuming any space on the filesystem, and does not have any quota
name = eschrock
unixname = eschrock
unixid = 132651
winname = (unset)
winid = (unset)
usage = 20.0G
USAGE QUOTA SOURCE
321K - -
9.94K - -
20.0G - -