2.
Select the service, then enter disable command to disable it.
hostname:configuration services> nis
hostname:configuration services nis> disable
Related Topics
"Enabling a Service (CLI)" on page 228
■
"List of Available Appliance Services" on page 234
■
"Required Service Ports" on page 236
■
Viewing Service States in the CLI
Use the following procedure to view service states.
1.
Go to configuration services.
2.
Enter the show command to list the current state of all services.
3.
To view the state of an individual service, select the service and then enter show.
hostname:configuration services> nis
hostname:configuration services nis> show
Properties:
Related Topics
"Enabling a Service (CLI)" on page 228
■
"Setting Service Properties (CLI)" on page 231
■
"List of Available Appliance Services" on page 234
■
"Required Service Ports" on page 236
■
Viewing Service Help in the CLI
Use the following procedure to display available commands for a service.
<status> = online
domain = fishworks
broadcast = true
ypservers =
Viewing Service States in the CLI
Appliance Services
229