Setting Service Properties (Cli) - Oracle ZFS Storage Appliance Administration Manual

Icon Description
Go to the service screen to configure properties and view logs. This button appears when you hover
over a service.
The service is enabled and working normally.
The service is offline or disabled.
The service has a problem and requires operator attention.
Enables or disables the service.
Restarts the service.
Enable/disable not available for this service.
Restarts the currently unavailable service. You must enable the service first).
1. Go to Configuration > Services.
2. Double-click a service.
Change the properties and then click APPLY.
3.
To reset properties, click REVERT.
Related Topics
"Enabling a Service (BUI)" on page 227
■
"List of Available Appliance Services" on page 234
■
"Required Service Ports" on page 236
■

Setting Service Properties (CLI)

Use the following procedure to define properties for a service. Property names are similar to
their names in the BUI, but CLI names are usually shorter and sometimes abbreviated.
1.
Go to configuration services.
2.
Select a service and enter show to view the list of properties you can set for that
service, along with their current values.
Setting Service Properties (CLI)
Appliance Services 231