Switching Operations To The Recovery Site (Cli) - Oracle ZFS Storage Appliance Administration Manual

2. From the source appliance, create a target as described in
Replication Target (CLI)" on page
3. Create a replication action and schedule a continuous replication. See
a Replication Action (CLI)" on page
Continuous replication minimizes data loss in the event of a disaster at the production
Note -
site.
Next Step
"Switching Operations to the Recovery Site (CLI)" on page 521
■

Switching Operations to the Recovery Site (CLI)

After a failure occurs at the production site, perform a reverse replication at the recovery site,
and then redirect client operations to the recovery site.
1.
From the target appliance, enter shares replication.
host-offsite:> shares replication
2.
Enter sources to list the source appliances that are associated with this target.
host-offsite:shares default replication> sources
Look for the package replicated by the source appliance.
3.
In this example, source-001 is the source appliance number, and host-prod is the source
appliance name. kmm2 is the local project name in replication package number package-001.
source-001 host-prod
PROJECT
package-000 <unknown>
package-001 kmm2
GMT+0000
(UTC)
4.
Enter select and the source appliance number.
host-offsite:shares default replication sources> select source-001
5.
Enter select and the replication package number.
host-offsite:shares default replication source-001> select package-001
Switching Operations to the Recovery Site (CLI)
475.
478.
STATE
idle unknown
idle
"Creating a
"Creating
LAST UPDATE
Wed May 01 2015 20:06:27
Remote Replication 521