Table of Contents
Advertisement
Adding a Static Route (BUI)
8.
Use the Owner pull-down list to assign one of the two interfaces to the other
head and click "APPLY".
Adding a Static Route (BUI)
1.
Go to Configuration>Network>Routing.
2.
Click the add icon.
Fill in the properties as described earlier.
3.
4.
Click "ADD". The new route will appear in the table.
Deleting a Static Route (BUI)
Go to Configuration>Network>Routing.
1.
Mouse-over the route entry, then click the trash icon on the right.
2.
Network Configuration (CLI)
Network configuration is under the configuration net, which has sub commands for devices,
datalinks, interfaces, and routing. The show command can be used with each to show the
current configuration:
caji:> configuration net
caji:configuration net> devices show
Devices:
DEVICE
igb0
igb1
igb2
igb3
caji:configuration net> datalinks show
Datalinks:
DATALINK CLASS
68
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
UP
SPEED
true
1000 Mbit/s
true
1000 Mbit/s
true
1000 Mbit/s
true
1000 Mbit/s
LINKS
igb0 device
igb0
MAC
0:14:4f:9a:b9:0
0:14:4f:9a:b9:1
0:14:4f:9a:b8:fe
0:14:4f:9a:b8:ff
LABEL
datalink1
Advertisement
Table of Contents
