Using The Dynamic World Wide Name (Wwn) Feature; Drive Tray Indicators; Rear View Of The Sl3000 Lto Drive Tray - Oracle StorageTek SL3000 Manual

Click Refresh to display current configuration data.
3.
To edit an individual drive tray serial number:
4.
a.
b.
To edit multiple drive tray serial numbers at once, you can edit a
5.
comma-separated value (csv) file:
a.
b.
c.
Click Apply.
6.

Using the Dynamic World Wide Name (WWN) Feature

The dynamic World Wide Name (dWWN) feature assigns world wide names to drive
slots rather than the drives themselves. This allows you to swap or replace drives
without bringing down the entire operating system. Additionally, the WWN remains
the same even when you partition the library.

Drive Tray Indicators

Figure 9–1 Rear View of the SL3000 LTO Drive Tray
Double-click the Drive Tray S/N field.
Enter the drive tray serial number. Proceed to step 6.
Click Export, and then save the file to a desired location.
Open the file and edit only the drive tray serial numbers. Do not alter any
other values. Save the changes.
In SLC, click Import. Locate the updated .csv file, and then click Open.
Drive Tray Indicators
Configuring Drives 9-3