Table of Contents
Advertisement
http://hostname/shares/mountpoint/share_name
■
https://hostname/shares/mountpoint/share_name
■
The HTTPS server uses a self-signed security certificate.
■
To configure HTTP, see the following sections:
"Adding HTTP Access to a Share (BUI)" on page 265
■
"HTTP Properties and Logs" on page 265
■
"HTTP Authentication and Access Control" on page 266
■
Adding HTTP Access to a Share (BUI)
1.
Go to Configuration > Services.
2.
Check that the HTTP service is enabled and online. If not, enable the service.
Select or add a share in the Shares screen.
3.
4.
Click the Protocols tab, and check that HTTP access is enabled.
(Optional) Set the Share mode access to Read only or Read/write.
5.
Related Topics
"HTTP Properties and Logs" on page 265
■
"HTTP Authentication and Access Control" on page 266
■
HTTP Properties and Logs
TABLE 60
HTTP Properties
Property
Require client login
Protocols
Adding HTTP Access to a Share (BUI)
Description
Clients must authenticate before share access is allowed,
and files they create will have their ownership. If this
property is not set, files created will be owned by
the HTTP service with user "nobody". See
Authentication and Access Control" on page
Select which access methods to support HTTP, HTTPS,
or both.
Appliance Services
"HTTP
266.
265
Advertisement
Table of Contents
