Table of Contents
Advertisement
A storage appliance that will provide the storage on the network
■
A network that will link the client to the storage
■
To configure SAN, use the following sections:
Configuring FC Port Modes (BUI)
■
Discovering FC Ports (BUI)
■
Creating FC Initiator Groups (BUI)
■
Associating a LUN with an FC Initiator Group (BUI)
■
Changing FC Port Modes (CLI)
■
Discovering FC Ports (CLI)
■
Creating FC Initiator Groups (CLI)
■
Associating a LUN with an FC Initiator Group (CLI)
■
Scripting Aliases for Initiators and Initiator Groups (CLI)
■
Configuring SAN iSCSI Initiators
■
Creating an Analytics Worksheet (BUI)
■
Adding an iSCSI Target with an Auto-generated IQN (CLI)
■
Adding an iSCSI Target with a Specific IQN and RADIUS Authentication (CLI)
■
Adding an iSCSI Initiator with CHAP Authentication (CLI)
■
Adding an iSCSI Target Group (CLI)
■
Adding an iSCSI Initiator Group (CLI)
■
Configuring SRP Target (BUI)
■
Configuring SRP Targets (CLI)
■
To learn more about SAN, see the following:
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
■
Configuring FC Port Modes (BUI)
1.
To use FC ports, set them to Target mode on the Configuration > SAN screen
of the BUI, using the drop-down menu shown in the following image. You
Configuring FC Port Modes (BUI)
Configuring the Appliance
129
Advertisement
Table of Contents
