Oracle ZFS Storage Appliance Administration Manual page 311

Configuring DNS (CLI)
The CLI includes built-ins for nslookup and getent hosts, which can be used to test that
hostname resolution is working:
hostname:> nslookup deimos
192.168.1.109 deimos.sf.fishworks.com
hostname:> getent hosts deimos
192.168.1.109 deimos.sf.fishworks.com
DNS Properties and Logs
The configurable properties for the DNS client include a base domain name and a list of
servers, specified by IP address. You must supply a domain name and at least one server
address; the server must be capable of returning an NS (NameServer) record for the domain you
specify, although it need not itself be authoritative for that domain.
DNS Properties
TABLE 78
Property
DNS Domain
DNS Server(s)
DNS Search Domain(s)
Allow IPv4 non-DNS resolution
Allow IPv6 non-DNS resolution
Changing services properties is documented in
(BUI)" on page 230 and
property names are shorter versions of those listed above.
DNS Logs
TABLE 79
Log
network-dns-client:default
"Setting Service Properties
"Setting Service Properties (CLI)" on page
Flushing Mappings from the Cache (CLI)
Description
Domain name to search first when performing partial
hostname lookups.
One or more DNS servers. IP addresses must be used.
List of up to four domains to be searched for after
the Active Directory domain, the deprecated Active
Directory search domain, and the specified DNS domain.
IPv4 addresses may be resolved to hostnames, and
hostnames to IPv4 addresses, using NIS and/or LDAP if
configured and enabled.
IPv4 and IPv6 addresses may be resolved to hostnames,
and hostnames to IPv4 and IPv6 addresses, using NIS
and/or LDAP if configured and enabled.
231. The CLI
Description
Logs the DNS service events
Appliance Services 311