Table of Contents
Advertisement
Configuring SNMP to Serve Appliance Status (BUI)
1.
Go to Configuration > Services > SNMP.
2.
Set the community name, authorized network and contact string.
3.
(Optional) Set the trap destination to a remote SNMP host, else set this to
127.0.0.1.
Click APPLY to commit the configuration.
4.
Restart the service.
5.
Configuring SNMP to Send Traps (BUI)
1.
Go to Configuration > Services > SNMP.
2.
Set the community name, contact string, and trap destination(s).
(Optional) Set the authorized network to allow SNMP clients, else set this to
3.
127.0.0.1/8.
Click APPLY to commit the configuration.
4.
5.
Restart the service.
6.
You must configure alerts to send the traps you want to receive.
For more information about alerts, see
Related Topics
"SNMP Properties" on page 323
■
SNMP Properties
SNMP Properties
TABLE 91
Property
Version
"Configuring Alerts" on page
Description
Toggles between v1/2c and v3.
Configuring SNMP to Serve Appliance Status (BUI)
186.
Appliance Services
323
Advertisement
Table of Contents
Need help?
Do you have a question about the ZFS Storage Appliance and is the answer not in the manual?
Questions and answers