Oracle ZFS Storage Appliance Administration Manual page 548

Remote Replication Concepts
TABLE 122
BUI Property
Target
Pool
Export data path
Limit bandwidth
Enable SSL-
encryption
Disable
compression
Include Snapshots
Retain user
snapshots on
target
Include clone
origin as data
Update frequency
Schedule
The following table describes the CLI read-only replication action properties.
548 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
Replication Action CLI Properties (BUI and CLI)
CLI Property Description
target Unique identifier for the replication target system. This property is
specified when an action is initially configured and cannot be edited.
pool Storage pool on the target where this project will be replicated. This
property is specified when an action is initially configured and not shown
thereafter.
export_path Enter a path to an NFS share for this action as NFS://server/path. This
exports the replication stream to a file on an NFS server, which you can
physically move to the remote target site, and then import the initial
replica onto the target appliance. For procedures, see
Replication (BUI)" on page
max_bandwidth Specifies a maximum speed for this replication update (in terms of amount
of data transferred over the network per second). Changes made to this
property during a replication update do not take effect until the next
update.
use_ssl Whether to encrypt data on the wire using SSL. Using this feature may
have an impact on per-action replication performance.
compression The replication stream is compressed by default. Disable if compression
is provided by another means, such as a WAN accelerator. For more
information, see
include_snaps Determines whether replication updates include non-replication snapshots.
For details, see
retain_user_snaps_ Retains user-generated snapshots on the replication target appliance for
on_target the associated action, even after the snapshots are destroyed on the source
appliance. The snapshots retained on the target can then be used as part
of a disk-to-disk or data backup solution. For details, see
Replication for Disk-to-Disk
include_clone_ Controls the replication of each share that was cloned from a share that is
origin_as_data external to the replication package on the target. Select this option to insert
a complete copy of the clone origin snapshot's data into the replica of the
clone. If you deselect this option, a clone created from an external origin
snapshot will share storage with the replica of the clone origin snapshot
that resides in replication target's pool. Sharing storage saves space, but if
the replication target does not contain the external clone origin snapshot,
the replication of the clone will fail. For details, see
Package or Share" on page
continuous Select Scheduled or Continuous. For details, see
Packages" on page
schedule Select the frequency and details for every half hour, hour, day, week, or
frequency month.
482.
"Compressed Replication" on page
"Replication Snapshot Management" on page
Backup.
551.
530.
"Creating an Offline
549.
543.
Using Remote
"Cloning a Replication
"Replication Actions and