NEC UNIVERGE UM8000 User Manual page 64

Configuring the Extended Automated Attendant
The extended automated attendant
mailboxes or transaction boxes) linked to the extension. This significantly reduces the potential database size and
increases system responsiveness by decreasing the system resource utilization and system administration.
When the extended automated attendant is activated, it acts as an additional database for non-subscriber extensions.
It is referenced only if a caller dials an extension that is not found in the subscriber database. In case of a conflict, the
Extended auto attendant uses the last precedence with the other call management tools, such as transaction boxes or
directory groups, and does not interfere with their operations.
NOTE
A
N EXAMPLE OF SOME EXTENSIONS THAT UTILIZE THE EXTENDED AUTOMATED ATTENDANT ARE A CONFERENCE ROOM
OTHER GENERAL PURPOSE EXTENSION THAT DOES NOT HAVE AN ASSOCIATED MAILBOX OR MESSAGING SERVICE
To configure the extended automated attendant
In the Navigation Pane, click Call Management > Extended automated attendant.
1.
For detailed field information, see the
Select Activate automated attendant.
2.
In Extension (range), type the extension, extension range, or ranges the extended automated attendant
3.
manages.
Select the Transfer type.
4.
If Await answer, Release, or Wait for ringback are is selected as the transfer type, specify the number of times
the extension rings before the automated attendant regains control.
Click Save.
5.
Related Topics
System Schedules
System Configuration
enables callers to dial extensions when there are no database entities (subscriber
Call Management > Extended Automated Attendant
, ,
THE LUNCH ROOM OR
.
table.
64