NEC UNIVERGE UM8000 User Manual page 454

System > Switch > Dialing Codes
Field
Outdial access code
Return call outdial
access code
Call transfer sequences
Initiate sequence
Connect sequence
Recall sequence
Busy recall sequence
Page Field Descriptions
Description
The outdial access number that the messaging system dials
to call outside the system.
9,
For example, if you type
9 and pauses before dialing the external number. The system
automatically dials the outdial access number before dialing
any message delivery number that is greater than or equal
to the outdial trigger length.
The outdial access number that the messaging system dials
to call outside the system for a Return Call.
The dialing code that puts a caller on hold before dialing the
extension to transfer the caller.
The dialing code to complete the transfer when the called
party answers or to release the call to the destination
number.
The dialing code to recall the caller from hold when the
internal extension is busy or does not answer.
This sequence represents the dialing code to return to the
unidentified caller when the internal extension is busy. This
field is optional.
When this field is blank, the system uses the Recall
sequence when an internal extension is busy. When a
sequence is entered in this field, the system uses this dialing
code when an internal extension is busy and only uses the
Recall sequence when an internal extension does not
answer.
(nine comma), the system dials
454