NEC UNIVERGE UM8000 User Manual page 428

Field
Startup
Error notices to
Page Field Descriptions
Description
Accepts the following values that are active when the
messaging system is restarted:
• C. Disable Disk Fault Tolerance. Disk Fault Tolerance is a
type of error handling for the messaging system
conversation. When the system encounters problems
accessing the hard disk while playing a prompt or
message, the system treats the prompt or message as if it
were missing and continues the conversation. The C
setting sets the system to halt the conversation and
display an error message that a file is inaccessible.
• CNG. Incoming Fax Tone. The messaging system
identifies incoming fax tones with the default settings. The
default settings are 1100 hertz, +/- 38 hertz and +/- 15%
of cadence. To specify different fax tones, type
cng=<frequency>,<dev>,<timedev>. For example,
"cng=1050,55,18" looks for a fax carrier of 1050 hertz, +/
- 55 hertz and +/- 18% of cadence.
• mk<n>. System IDs During Directory Menus. Enables
callers to enter full system IDs during directory menus,
where <n> is the number of seconds the messaging
system waits before routing a call to a destination on a
directory menu.
• ^# T51. Phone Trace, Level 1. The messaging system
writes additional information about each phone call in the
call log file. This trace is useful when diagnosing reports of
delayed message delivery.
• ^# T52 T71. Phone Trace, Level 2. Use for a trace that
provides a higher diagnostic level, including details about
dialout operations.
Specify one or more personal IDs, separated by commas, for
subscribers who should voice message notification for error
notices when errors occur.
When set to 0 (zero), subscribers who are configured to
receive public messages receive voice mail error notification
messages. Leave this field blank to stop sending error
notices.
428