NEC UNIVERGE UM8000 User Manual page 149

Configuring Default Subscriber E
The messaging system must be licensed for e-mail integration and the integration configuration steps must be
completed during installation before subscribers can use the e-mail features.
Subscribers receive new e-mail message notifications through the messaging system or the e-mail integration package.
Subscribers can listen to e-mail messages from any touchtone phone. When adding new subscriber accounts, specify
the e-mail address for each subscriber on the subscriber profile page.
Use this page to configure the default e-mail notification settings for subscribers. The e-mail integration must be
licensed and installed to use this feature. See the Installation Guide for details.
To configure e mail integration
-
In the Navigation Pane, click Subscribers > Subscriber Template > E-mail.
1.
For detailed field information, see the
On the Server type list, select the e-mail protocol used by the e-mail server. Supported e-mail protocols are: IMAP
2.
and POP3. IMAP uses port 143 and POP3 uses port 110.
Select the Authentication Method used by the e-mail server: Plaintext or NTLM.
3.
Type the server name or IP address of the e-mail post office in the Server name field.
4.
Type the access port used by the SMTP or IMAP e-mail server in the Port field.
5.
Select Use SSL to use the secure socket layer protocol, the default port number is 993.
6.
Click Save.
7.
Related Topics
Subscriber Template Overview
Configuring E-mail Settings
Configuring Subscriber E-mail Settings
Subscriber Template Overview
mail Settings
-
Subscribers > Subscriber Template > E-mail table.
149