NEC UNIVERGE UM8000 User Manual page 460

System > Switch > Park and Page
Field
Park and page ID
Park code
Pickup code
Park pool
Internal paging code
External paging code
Page type
Internal page zone
External page zone
Use whisper to
announce paging
Use call progress for
parking
Use call progress for
paging
Pickup delay
Repeat page... times
Wait between repeats...
seconds
Page Field Descriptions
Description
The system ID for call paging. Use this ID for a one
individual subscribers.
The park sequence used by the phone system.
The pickup sequence used by the phone system.
Select to have the system use only one port for cut
Clear to use two ports for cut-through paging.
The transfer sequence to transfer the call for internal paging.
The transfer sequence to transfer the call for external paging.
There are three types of call park and paging:
Internal. After placing the caller on hold, the messaging system dials
the subscriber's pager and sends the phone number. The system then
reports if the call was successful before closing the call.
External. The messaging system transfers the caller to the
subscriber's paging service and ends the call.
User pager phone. After placing the caller on hold, the messaging
system dials the subscriber's pager and sends the phone number. The
system then reports if the call was successful before closing the call.
Internal paging lets extension users broadcast announcements to other
multiline terminal users, the announcement broadcasts to idle
extensions. An internal paging zone is a group of extensions. Up to
eight external paging zones can be defined.
External paging zones are overhead speakers connected to the phone
system. The overhead speakers can be subdivided into separate zones
that enable overhead paging to specific locations in a business. For
example, a lunch room, separate floors, or buildings. Up to eight
external paging zones can be defined.
Select to enable the whisper paging feature if the phone system
supports the feature. With whisper paging, if the subscriber's extension
is busy, the messaging system announces using a subscriber phone
that a call is parked on another extension.
Clear to disable whisper paging.
Select to enable call parking with call progress.
Select to enable paging with call progress.
The maximum number of seconds that calls remain parked before the
messaging system takes the after
maximum number is 300.
The number of times the system pages a subscriber before taking the
-
after greeting action. The maximum number is five.
The number of seconds the system waits between paging retries. The
maximum number is 300.
-
key dialing rules for
-
through paging.
-
greeting action for a subscriber. The
460