NEC UNIVERGE UM8000 User Manual page 226

Enabling Call Park and Page
When a phone system supports the
extension without ringing the extension phone, calling the parked extension picks up the call.
The messaging system can automatically park incoming calls on specified extensions. When the phone system supports
paging, the messaging system notifies subscribers that a call is parked on a particular extension.
Whisper Paging
Depending on the phone system configuration, the messaging system can page subscribers on the overhead paging
system. When a subscriber extension is busy, the messaging system uses the subscriber phone to announce that a call
is parked on another extension; this is called
One-key Dialing Rules for Park and Page
After enabling systemwide call parking and paging features, assign call parking and paging to a one-key dialing rule for
subscriber greetings. Subscribers must rerecord their greetings to tell callers which one-key dialing rule to use for park
and page.
NOTE
O
NLY SYSTEM ADMINISTRATORS CAN PROGRAM ONE
-
GREETINGS WHEN ONE KEY DIALING RULES ARE SELECTED DURING A SUBSCRIBER GREETING
To turn on call park and page
You will need the phone system park and page codes to enable the park and page feature.
In the Repartee Administrator Navigation Pane, click
1.
For detailed field information, see the
Type the system ID for call paging in the
2.
one-key dialing rule.
Type the phone system park code in the
3.
Type the phone system pickup code in the
4.
Specify the range of ports used to park calls in the
5.
When assigning a single port for park and page, type the port number in both fields.
Type the internal paging code for the phone system in the
6.
Type the external paging code for the phone system in the
7.
Select one of the following for the
8.
• Internal. Phone system speakers.
• External. Overhead paging.
• User pager phone.
the phone number. The system then reports if the call was successful before closing the call.
Type the zone number for internal paging. Your technician can provide this information in the
9.
field.
Type the zone number for external paging. Your technician can provide this information in the
10.
field.
Select Use whisper to announce paging
11.
extension is busy.
Confirm that Use call progress for parking
12.
CAUTION!
C
ALL PROGRESS WITH PARKING AND PAGING IS NOT SUPPORTED ON THE
SV8100
THE PHONE SYSTEM MIGHT NOT LET CALLERS COMPLETE THE CALL
INFORMATION ABOUT INTERNAL AND EXTERNAL PAGING
Confirm that Use call progress for paging
13.
Phone System Overview
park and page feature, an incoming call can be parked and paged on another
whisper
-
KEY DIALING
System > Switch > Park and Page
Park and page ID
Park code
Pickup code
Page type:
The messaging system dials the subscriber pager after placing the call on hold and sends
to enable the messaging system to page the subscriber phone when the
is not selected.
.
is not selected.
paging.
, ,
HOWEVER THEY MUST NOTIFY SUBSCRIBERS TO CHANGE THEIR
System > Switch > Park and
field. For example,
field.
field.
Park pool fields.
Internal paging code
External paging code
SV8100
PHONE SYSTEM
. R
EFER TO THE
.
Page.
table.
$PAGE . This ID can be used for a
field.
field.
Internal page zone
External page zone
. S
ELECTING THESE FEATURES WITH
SV8100
DOCUMENTATION FOR DETAILED
226