NEC UNIVERGE UM8000 User Manual page 26

To configure a default passwords
In the Navigation Pane, click Subscribers > Account Policy.
1.
The Security Settings page appears.
To require subscribers to set a security code, clear the Permit blank password check box.
2.
To require a minimum number of characters in a security code, select Minimum number of characters in
3.
password, then type the number in the text box.
In the Default password for each new subscriber field, type a different code. The password must be 3-9 digits
4.
in length.
Click Save.
5.
To limit the number of times a caller can enter an invalid system ID
In the Navigation Pane, click System > Configuration > General.
1.
In the Maximum number of attempts to enter a personal ID field, set the maximum number of times a caller
2.
can enter an invalid system ID. The default is ten.
In the Maximum security code/password attempts field, set the maximum number of times a subscriber can
3.
incorrectly enter a security code before having to reenter a valid system ID. The default number is one.
In the Callers entering a bad ID will be rerouted to field, type the system ID a caller is transferred to when the
4.
caller enters the maximum number of invalid IDs.
Click Save.
5.
Related Topics
Following Recommended Security Practices
Assigning System Manager Status
Understanding System and Personal IDs
System Overview 26