NEC UNIVERGE UM8000 User Manual page 305

Configuring General Parameters for a Remote Site
Configure the general networking parameters for the site.
Configuring Message Delivery for a Remote Site
The Message Delivery fields specify the times that calls to remote systems can be initiated. The system only initiates
calls during the specified hours. By limiting the schedule to times that long-distance toll charges are lowest you
minimize the cost of message networking calls.
The message delivery schedule must be specified for each remote site. Each remote site must be configured to accept
network calls during the same time period.
To configure general networking parameters
In the Navigation Pane, click Network > Remote Sites.
1.
Click Search to find and select a remote site.
2.
For detailed field information, see the
Click Voice name to record the remote site name.
3.
See To record or rerecord a voice name or greeting on the Administration Console
Select a protocol in the Protocol list.
4.
In the Type section, the page indicates whether the remote site uses the Public or a Private network. For the public
5.
network, type the country code, if applicable, area code, and phone number for the remote site. For private
networks, type the remote site Private ID.
In the Restrictions section select the appropriate restrictions:
6.
• Outgoing. To prevent the local site from making message delivery calls to the remote site.
• Screen. To prevent the local site from accepting message delivery calls from the remote site.
NOTE
W Outgoing
HEN BOTH
. I
REMOTE SITE F NEITHER
FROM THE REMOTE SITE
Set the number of failures allowed in the Maximum failed calls allowed field. The default value is 3.
7.
In the Message Delivery section:
8.
Type up to two phone numbers to deliver messages to the remote site. Include the outdial access code and
a.
other dialing codes needed.
Specify a delivery schedule and intervals.
b.
Specify the number of Rings to wait.
c.
Specify the Notification interval.
d.
Select a message Delivery method:
e.
• Batch. Delivers messages to remote sites according to the time specified in the Delivery schedule field. All
messages to remote sites are delivered at once. The messaging system waits for the specified delivery
interval before retrying the designated number if the first message delivery is unsuccessful.
• Off. Turns off message delivery to the number.
Click Save.
9.
Related Topics
Message Networking Configuration
®
UNIVERGE UM8000 Message Networking
Adding a New Remote Site
Configuring the Remote Site Template
Configuring the Local Site
®
UNIVERGE UM8000 Message Networking
Network > Remote Sites
Screen
AND ARE SELECTED
Outgoing Screen
OR
.
table.
,
THE LOCAL SITE DOES NOT CALL THE REMOTE SITE OR ACCEPT CALLS FROM THE
,
IS SELECTED THE LOCAL SITE CAN CALL THE REMOTE SITE AND ACCEPT CALLS
for details.
305