NEC UNIVERGE UM8000 User Manual page 381

Call Management > System Operator Box - Call Transfer
Field
-
Day transfer to
-
Night transfer to
Transfer type
Wait for... rings
Allow Holding
Use VOX Holding
Page Field Descriptions
Description
Turn on call transfer during day mode and specify the
extension where the messaging system transfers calls.
CAUTION!
F SV8300
OR PHONE SYSTEMS CLEAR THE
to
FIELD IF YOUR REGION DOES NOT SUPPORT ZERO FOR THE
.
OPERATOR
Turn on call transfer during night mode and specify the
extension where the messaging system transfers calls.
Specify the call transfer type used when transferring calls
between the messaging system and phone system.
If call transfer is enabled, then select one of the call transfer
types defined below. All call transfer types put the call on
hold and then dial the extension. The most common is the
Release transfer type. The Await Answer transfer type is
required for configuring call screening and call holding
options.
• Await Answer. The system transfers the call to the
extension if the call is answered within the number of
rings specified in the Wait for ... rings field. If the
extension is busy or goes unanswered, the system plays
the greeting and then takes the after
transfer type is required for configuring call screening and
call holding.
• Wait for ringback. The system transfers the call to the
extension if a call is answered within the number of rings
specified in the Wait for ... rings field. If the call is not
answered within the specified number of rings, the call is
released to the phone system.
• For unanswered calls, the caller cannot leave a message
unless the phone system transfers the call using call
forward to personal greeting.
• For busy calls, the system plays the greeting, then
-
takes the after greeting action.
• When this transfer type is selected, some transfer
options are unavailable. This call transfer type is not
supported with phone systems that use DTMF call
progress.
• Release. The system releases the call after dialing the
extension or phone number. If the subscriber's phone is
busy or goes unanswered, the caller can leave a message
if the phone system is configured to transfer the call by
using call forward to personal greeting. When this transfer
type is selected, the transfer, screening and holding
options are not available.
When the Wait for ringback or Await answer call transfer type
is selected, sets the number of times the extension rings
before the call is released or recalled.
Call holding is available when the line is busy. This setting
applies only if the call transfer type is set to Await Answer
or Wait for ringback. If this option is selected, then callers
can hold or leave a message.
Callers speak to hold instead of pressing a key on the phone
keypad.
Day-transfer
-
greeting action. This
381