AudioCodes Mediant 1000B User Manual page 648

2. Click Add; the following dialog box appears:
Figure 34-5: IP-to-IP Routing Table - Add Row Dialog Box
3. Configure an IP-to-IP routing rule according to the parameters described in the table
below.
4. Click Add.
Table 34-3: IP-to-IP Routing Table Parameter Descriptions
Parameter
Index
[IP2IPRouting_Index]
Routing Policy
sbc-routing-policy-
name
[IP2IPRouting_RoutingPol
icyName]
Name
route-name
[IP2IPRouting_RouteNam
e]
Rule (Matching Characteristics)
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Assigns an SBC Routing Policy to the rule. The SBC Routing Policy
associates the rule with an SRD(s). The SBC Routing Policy also
defines default LCR settings as well as the LDAP servers used if the
routing rule is based on LDAP routing (and Call Setup Rules).
If only one SBC Routing Policy is configured in the SBC Routing Policy
table, the SBC Routing Policy is automatically assigned. If multiple SBC
Routing Policies are configured, no value is assigned.
For configuring SBC Routing Policies, see 'Configuring SBC Routing
Policy Rules' on page 656.
Note: The parameter is mandatory.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters. By default, no value is
defined.
648
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044