Viewing The Installed User Info File Name; Amd Sensitivity File; Software License Key - AudioCodes Mediant 1000B User Manual

User's Manual
Note:
•
Make sure that there are no spaces between the values.
•
To modify the SBC User Info table using a User Info file, you need to load to the
device a new User Info file containing your modifications.
Below is an example of a configured User Info file:
[ SBC ]
FORMAT LocalUser,UserName,Password,IPGroupID
john,john_user,john_pass,2
sue,sue_user,sue_pass,1

43.1.8.4 Viewing the Installed User Info File Name

You can view the name of the User Info file currently installed on the device, through the
device's CLI (in Enable mode):
# debug auxilary-files user-info info
For example:
# debug auxilary-files user-info info
User Info File Name MyUsers.txt

43.1.9 AMD Sensitivity File

The device is shipped with a default, pre-installed AMD Sensitivity file for its Answering
Machine Detection (AMD) feature. This file includes the detection algorithms for detecting
whether a human or answering machine has answered the call, and is based on North
American English. In most cases, the detection algorithms in this file suffice even when
your deployment is in a region where a language other than English is spoken. However, if
you wish to replace the default file with a different AMD Sensitivity file containing
customized detection algorithms, please contact your AudioCodes sales representative for
more information.
The AMD Sensitivity file is created in .xml format and then converted to a binary .dat file
that can be installed on the device. The XML-to-binary format conversion can be done
using AudioCodes DConvert utility. For more information on using this utility, refer to
DConvert Utility User's Guide. Only one AMD Sensitivity file can be installed on the device.
To install a new AMD Sensitivity file, use any of the following methods:

Web interface: On the Load Auxiliary Files page - see 'Loading Auxiliary Files' on page
715.

TFTP during initialization: You need to configure the ini file parameter,
AMDSensitivityFileName, and then copy the AMD Sensitivity file to the TFTP
directory.

Automatic Update feature: For more information, see Automatic Update Mechanism.
For this method, the AMDSensitivityFileUrl parameter must be set through SNMP or
ini file.
For more information on the AMD feature, see 'Answering Machine Detection (AMD)' on
page 199.
43.2

Software License Key

The device is shipped with a pre-installed Software License Key, which determines the
device's supported features, capabilities, and available resources. You can upgrade or
Version 7.0 739 Mediant 1000B Gateway and E- SBC
43. Software Upgrade